15° Elbow, Galvanized Rigid Conduit (GRC)
Product Features
-
Overview
Rigid conduit elbows are specifically designed to provide a smooth and gradual change in direction for the conduit. They come in various angles, such as 90 degrees (right angle), 45 degrees, and other custom angles, allowing electricians to navigate around obstacles, make turns, stub-ups or bring conduit runs to different heights.Rigid Steel Conduit Elbow is manufactured from prime conduit shell with high-strength in accordance with the latest specifications and standard of ANSI C80.1(UL6). The interior and exterior surface of elbows are free from defect with a smooth welded seam, and are thoroughly and evenly coated with zinc using hot dip galvanizing process.
-
Consistent Quality
Made from high-quality flat rolled steel utilizing high production tube mills utilizing the electric resistance welding method. Uniform galvanized protection and smoothness on the interior and exterior coatings. The inside surface is obstruction free and smooth to reduce friction between conduit wall and wire. Manufactured for long life – durable and strong. Threads are galvanized after cutting. No flaking or chipping when subjected to extreme stress.
-
Locations
RMC’s rigid conduit elbows meet the requirements of National Electrical Code Article 344 for use in indoor and outdoor locations and in wet and dry locations, including Class 1 Division 1 Hazardous Locations. Rigid conduit provides exceptional physical protection, reduces exposure to EMF and shields against electromagnetic interference.
-
Lower Life-Cycle Costs
Hot dipped galvanized coating provides enhanced corrosion protection. Physical and mechanical properties ensure that the pipe has an extended life cycle. Resists cracking, flaking, peeling, impact, and damage from severe bending. Impact-resistant and non-combustible. 100% Recyclable.
-
Listings
Underwriters Laboratories Standard for rigid conduit elbows (UL6) file # E531580. American National Standards Institute (ANSI® C80.1). National Electric Code® Article 344. Additional information can be found in the Underwriters Laboratories Inc., General information for Electrical Equipment Directory. The UL product category for Rigid is DYIX.
| Item # |
UPC |
Size |
Min. UL Radius “A” (in.) |
Offset “B” (in.) |
Straight Length “C” (in.) |
Weight/100PCS (lbs.) |
PCS/Carton |
Weight/Carton (lbs.) |
| RMCEL0515 |
0081013870284 |
1/2″ |
4 |
0.63 |
1.87 |
39 |
50 |
20 |
| RMCEL0715 |
0081013870338 |
3/4″ |
4.5 |
0.7 |
2.1 |
54 |
50 |
27 |
| RMCEL1015 |
0081013870383 |
1″ |
5.75 |
0.79 |
2.26 |
89 |
35 |
32 |
| RMCEL1215 |
0081013870437 |
1-1/4″ |
7.25 |
0.98 |
2.75 |
145 |
30 |
44 |
| RMCEL1515 |
0081013870482 |
1-1/2″ |
8.25 |
1.14 |
3.25 |
201 |
15 |
30 |
| RMCEL2015 |
0081013870536 |
2″ |
9.5 |
1.34 |
3.94 |
312 |
10 |
47 |
| RMCEL2515 |
0081013870581 |
2-1/2″ |
11 |
1.53 |
4.53 |
588 |
50 |
294 |
| RMCEL3015 |
0081013870635 |
3″ |
13 |
1.97 |
5.9 |
821 |
35 |
368 |
| RMCEL3515 |
0081013870680 |
3-1/2″ |
15 |
2.36 |
7.09 |
1232 |
35 |
431 |
| RMCEL4015 |
0081013870734 |
4″ |
16 |
2.6 |
7.87 |
1567 |
35 |
548 |
| RMCEL5015 |
0081013870789 |
5″ |
24 |
3.7 |
11.06 |
3294 |
BULK |
824 |
| RMCEL6015 |
0081013870813 |
6″ |
30 |
4.33 |
12.72 |
5066 |
BULK |
1267 |
