90° Special Radius Elbow, Galvanized Rigid Conduit (GRC)

Spec Sheet image

Product Features

  • Overview
    Rigid Conduit Special Radius Elbows are specifically designed to provide a smooth and gradual change in direction for the conduit. They come in various angles, such as 90 degrees (right angle), 45 degrees, and other custom angles, allowing electricians to navigate around obstacles, make turns, stub-ups or bring conduit runs to different heights. Rigid Steel Conduit Elbow is manufactured from prime conduit shell with high-strength in accordance with the latest specifications and standard of ANSI C80.1(UL6). The interior and exterior surface of elbows are free from defect with a smooth welded seam, and are thoroughly and evenly coated with zinc using hot dip galvanizing process.
  • Consistent Quality
    Made from high-quality flat rolled steel utilizing high production tube mills utilizing the electric resistance welding method. Uniform galvanized protection and smoothness on the interior and exterior coatings. The inside surface is obstruction free and smooth to reduce friction between conduit wall and wire. Manufactured for long life – durable and strong. Threads are galvanized after cutting. No flaking or chipping when subjected to extreme stress.
  • Locations
    RMC’s rigid conduit elbows meet the requirements of National Electrical Code Article 344 for use in indoor and outdoor locations and in wet and dry locations, including Class 1 Division 1 Hazardous Locations. Rigid conduit provides exceptional physical protection, reduces exposure to EMF and shields against electromagnetic interference.
  • Lower Life-Cycle Costs
    Hot dipped galvanized coating provides enhanced corrosion protection. Physical and mechanical properties ensure that the pipe has an extended life cycle. Resists cracking, flaking, peeling, impact, and damage from severe bending. Impact-resistant and non-combustible. 100% Recyclable.
  • Listings
    Underwriters Laboratories Standard for rigid conduit elbows (UL6) file # E531580. American National Standards Institute (ANSI® C80.1). National Electric Code® Article 344. Additional information can be found in the Underwriters Laboratories Inc., General information for Electrical Equipment Directory. The UL product category for Rigid is DYIX.

Certifications

Underwriters Laboratories Standard for EMT-Steel (UL797) file # E531582

American National Standards Institute (ANSI® C80.3)

National Electric Code® Article 358

Item # UPC Size Min. UL Radius “A” (in.) Offset “B” (in.) Straight Length “C” (in.) Weight/100PCS (lbs.) PCS/Carton Weight/Carton (lbs.)
RMCSW109018 0081013870932 1″ X 90° X 18″ 18 28 11 704 – –
RMCSW129018 0081013870045 1-1/4″ X 90° X 18″ 18 28 11 953 – –
RMCSW159018 0081013870151 1-1/2″ X 90° X 18″ 18 28 11 1149 – –
RMCSW209018 0081013870250 2″ X 90° X 18″ 18 28 11 1529 108 1651
RMCSW109024 0081013870949 1″ X 90° X 24″ 24 35 11 839 – –
RMCSW129024 0081013870052 1-1/4″ X 90° X 24″ 24 35 11 1136 – –
RMCSW159024 0081013870168 1-1/2″ X 90° X 24″ 24 35 11 1370 – –
RMCSW209024 0081013870267 2″ X 90° X 24″ 24 35 11 1731 108 1869
RMCSW259024 0081013870335 2-1/2″ X 90° X 24″ 24 35 11 2751 70 1926
RMCSW309024 0081013870397 3″ X 90° X 24″ 24 35 11 3594 48 1725
RMCSW359024 0081013870878 3-1/2″ X 90° X 24″ 24 35 11 4374 40 1749
RMCSW409024 0081013870458 4″ X 90° X 24″ 24 35 11 5119 40 2048
RMCSW109036 0081013870963 1″ X 90° X 36″ 36 47 11 1096 – –
RMCSW129036 0081013870076 1-1/4″ X 90° X 36″ 36 47 11 1484 – –
RMCSW159036 0081013870182 1-1/2″ X 90° X 36″ 36 47 11 1790 – –
RMCSW209036 0081013870274 2″ X 90° X 36″ 36 47 11 2290 108 2473
RMCSW259036 0081013870342 2-1/2″ X 90° X 36″ 36 47 11 3619 70 2533
RMCSW309036 0081013870403 3″ X 90° X 36″ 36 47 11 4727 48 2269
RMCSW359036 0081013870885 3-1/2″ X 90° X 36″ 36 47 11 5752 40 2301
RMCSW409036 0081013870465 4″ X 90° X 36″ 36 47 11 6733 40 2693
RMCSW509036 0081013870519 5″ X 90° X 36″ 36 47 12 10033 25 2508
RMCSW609036 0081013870564 6″ X 90° X 36″ 36 47 12 16867 15 2530
×

Enter your details to download